Upgrading the CP23xx-
RGBe/C laser software
This document provides upgrade instructions for projectors when the laser subsystem firmware (P/N:
001-115008-XX) is older than version 2.9
.
This document does not apply for projectors produced later than May 2022. Refer to the upgrade
procedure in the projector model's Service guide.
Affected products
The following products are affected:
•
CP23xx-RGBe
•
CP23xx-RGB/C
Required components
The following components are required.
Required components
•
Windows laptop computer
•
Laser subsystem firmware (P/N: 001-115008-XX)
•
Light Source Software Upgrade kit (P/N: 003-007102-XX), which contains the following
components:
•
T interface convert USB interface (A)
•
ST-LINK/V2 debugger—SWD interface (B)
•
20 pin 2.54 flat cable convert XH2.54-3P terminal (C)
•
SD card
Upgrading the CP23xx-RGBe/C Firmware Instruction Sheet
1
020-103665-01 Rev. 1 (014-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
