Christie CP2000-ZX, Instruction Sheet

Page: 4 / 5

4 of 5 CP2000-ZX LVPS Upgrade Instruction Sheet
020-100461-01 Rev. 1 (11-2009)
9. Remove the nut securing the main ground to the firewall.
10. Remove the 4, M6 screws securing the LVPS assembly.
NOTE: In -03 models remove the LED as
well. Keep it for use with the new LVPS assembly. (Figure 6)
11. Secure the new LVPS using the same mounting holes and hardware used with the old assembly.
Orient the LVPS with the high-pot adjustments on the right-hand side.
12. Install the LED to the bottom left screw used to secure the LVPS to the firewall. (Figure 7)
13. Secure green harness (ground) to the main earth ground stud using the nut removed in STEP 9.
(Figure 7)
Figure 6 Remove LVPS
Figure 7 Install New LVPS