CP23xx-RGB models—Use the Rack Stand Adapter bracket (P/N: 163-111104-XX) and follow
the product's instructions to the brackets with the rack stand.
CP22xx, CP42xx, CPxx-Xe, and Solaria One models
ID Foot location
Model
A
Front
CP2220, CP2230, CP2420-Xe, CP4220, CP4230,
and CP4420-Xe
B
Rear
CP2220, CP2230, CP2420-Xe, CP4220, CP4230,
and CP4420-Xe
C
Rear
CP2210, CP2415-Xe, Solaria One, and Solaria One+
D
Front
CP2210, CP2415-Xe, Solaria One, and Solaria One+
2. Align the foot brackets with the holes on the top of the pedestal.
Position the brackets with the flat portion of the bracket facing in.
3. Loosely install the four screws in each of the four foot brackets.
4. With two or more people, place the projector on top of the Christie Rack Mount Pedestal.
If required, adjust the foot bracket location to accommodate the projector.
5. Tighten the foot bracket screws.
6. Adjust the projector feet to obtain the required height and tilt of the projector.
See your projector manual for adjustment instructions.
Installation and setup
Christie Rack Mount Pedestal Installation and Setup Guide
12
020-100632-04 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
