C
™
serial
commands
The serial commands can be used to modify product settings. This document provides a list of all
available C
™
serial commands.
Depending on the projector you are working with, some commands may not be available.
To display a list of all commands available on your projector, run the serial help command:
(HLP?)
. To
use all the available commands, log in as service using the default password:
(UID "service"
"<password>")
.
AUT–Automation
Executes a macro from a script.
Parameters
•
Access level: Operator
•
Power level (minimum): Power Down
Commands
Command
Description
Values
AUT+EXEC "<script>" "<macro>"
Executes the specified macro from the
specified script.
script = Script to run the macro
macro = Macro to execute
Examples
Execute the MyMacro1 macro from the MyScript script:
(AUT+EXEC "MyScript" "MyMacro1")
Execute the MyMacro macro from the MyMacro script:
(AUT+EXEC "MyMacro")
C Technical Reference–Serial Commands
9
020-103075-05 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Summary of Contents for CineLife+ 4 Series
Page 1: ...Technical Reference 020 103075 05 CineLife Serial Commands...
Page 32: ......
