SST–System Status
Retrieves the various system status groups.
To retrieve a single item, include the item index number (
SST+
SUBCODE
?
yy) where yy is the index
number of the item. The response to each command is a single message for each item, with the
format:
(SST+
SUBCODE
!
yyy zzz
"Status Text" "Status Description")
where
•
yyy is the item index number
•
zzz is the alert condition (0=Unknown, 1=OK, 2=Warning, 3=Critical Error, 4=Sensor Failure)
Parameters
•
Access level: None
•
Power level (minimum): Power Down
Commands
Command
Description
Values
SST?
Returns information on all status groups, with one message
per item. (Read-only)
Where parameters are:
P1 = Index number
P2 = Error level
P3 = Value
P4 = Description
Error level is:
001 = No errors or warnings
002 = Warning
003 = Critical error
SST+ALRM?
Returns a summary of any active alarms. (Read-only)
SST+COOL?
Returns cooling data—cooling fans, air flow, and so on.
(Read-only)
SST+INTE?
Returns interlock data. (Read-only)
SST+LAMP?
Returns lamp operational data. (Read-only)
SST+LENS?
Returns lens data. (Read-only)
SST+NTWK?
Returns network configuration. (Read-only)
SST+SECU?
Returns security data. (Read-only)
SST+SERI?
Returns serial numbers. (Read-only)
SST+SYST?
Returns system data—power, hours of use, shutter open, and
so on. (Read-only)
SST+TEMP?
Returns temperature data. (Read-only)
SST+VERS?
Returns version numbers. (Read-only)
SST+VIDO?
Returns video related data. (Read-only)
Examples
Return the projector status:
(SST+ALRM?)
C
™
serial commands
C Technical Reference–Serial Commands
26
020-103075-05 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Summary of Contents for CineLife+ 4 Series
Page 1: ...Technical Reference 020 103075 05 CineLife Serial Commands...
Page 32: ......