Christie CCM-LX, User Manual, Page: 51 / 128

49
ENGLISH
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)
Controls
System
This function is to select the system of signal input to the projector. The available system
mode are listed on the pull-down menu button according to the input signal. Select a sys-
tem and then click
Set button.
Available selection at the R G B(PC analog) input
Item Description
XGA1 ........................ It automatically switches to the proper computer
system of the input signal.
* The computer system modes (VGA, SVGA, XGA.
SXGA, UXGA, WXGA...) which meet the input sig-
nal are listed.
Available selection at the HDMI input
Item Description
D-XGA ...................... It automatically switches to the proper computer
system of the input signal.
* The computer system modes (D-VGA, D-SVGA,
D-XGA. D-SXGA1...) which meet the input signal
are listed.
D-480p .................... It automatically switches to the proper scanning
system of the input signal.
* The computer system modes (D-480p, D-575p,
D-720p, D-1035i, D-1080i and D-1080p)
Available selection at the Y,Pb/Cb,Pr/Cr input
Item Description
AUTO ........................ It automatically switches to the proper scanning
system of the input signal.
* The selectable scanning systems are 480i, 575i,
480p, 575p, 720p, 1035i, 1080i and 1080p.
Available selection at the Video, S-video or Scart input
Item Description
AUTO ........................ It automatically switches to the proper color sys-
tem of the input signal.
* The selectable color systems are PAL, SECAM,
NTSC, NTSC4.43, PAL-M and PAL-N.
* AUTO is fixed at the Scart input.
If the mode (Mode1 to Mode 10, ExMode11 to ExMode50) which is stored in the item "PC
Adjustment" ( p.52) is available, they are also listed together with the above mode.
Downloaded from ProjectorsManual.com Manuals