Christie CC50-2301, Installation Manual

Page: 32 / 56

2-22 CC50-2301/CC67-3001/CC72-3301 Installation Manual
020-100248-03 Rev. 1
Section 2: Installation and Setup
Adjusting Image Geometry using the 6-axis Adjuster
The light engine is mounted to the 6-axis adjuster, which provides a range of motion in the XYZ- axes. By
moving the light engine within this range, the geometry of a displayed image can be fine-tuned. The 6-axis
adjuster supports the following adjustments:
• horizontal position
• vertical position
• horizontal keystone
• vertical keystone
• zoom
• tilt
A different-colored knob is assigned to each adjustment. A color-coded quick reference label illustrating the
adjustments is attached to the projector. See
Figure 2-25 .
Figure 2-25 Adjustments for 6-Axis Adjuster
1. Center the image on screen, by adjusting the vertical and/or horizontal position.
2. Zoom out the image (make smaller) until it fits within the borders of the screen.
3. Adjust keystone and tilt.
4. Zoom in the image (make larger) to completely fill the screen.
5. Repeat any of the adjustments until the image appears correct.
6. Repeat Steps 1 to 5 for each display.
Adjustments for
projector in
vertical orientation
Adjustments for
projector in
horizontal orientation
(default)