Removing the light dump
The light dump absorbs any off-state light from the light engine.
Estimated replacement time: 3 minutes
1. Remove the top cover (on page 34).
2. Loosen the two captive screws on the front top support bracket and remove.
3. Loosen the captive screw securing the light dump.
4. Remove the light dump.
5. If required, replace the light dump.
6. To re-install, follow these steps in reverse order.
Replacing the shutter
The shutter blocks the light coming into the projector lens.
Estimated replacement time: 10 minutes
Optics
Boxer 4K Service Guide
72
020-101699-04 Rev. 1 (02-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for Boxer 30
Page 1: ...Service Guide 020 101699 04 Boxer 4K...
Page 113: ......
