•
Read and understand all written procedures prior to commencing a service procedure.
•
Understand and follow all local safety codes and requirements when servicing energized (live)
equipment.
•
Perform equipment service in a location free of obstructions and other hazards. For example,
you must have an unobstructed view of the area being serviced.
Wear personal protective equipment (PPE) clothing appropriate to the service you are performing. This
includes, but is not limited to, protective (electrically insulated) footwear, safety glasses, and gloves
rated for the working voltage of the equipment you are servicing.
Safety and warning guidelines
Read all safety and warning guidelines before installing or operating the projector.
This projector must be operated in an environment that meets the operating range specification. Use
only the attachments and/or accessories recommended by Christie. Use of others may result in the
risk of fire, shock, or personal injury.
Warning! If not avoided, the following could result in death or serious injury.
•
This product must be operated in an environment that meets the operating range as specified in
this document.
•
Do not look directly into the lens when the light source is on. The extremely high brightness can
cause permanent eye damage.
•
EXTREME BRIGHTNESS! When accessing a restricted access location for product service or
maintenance, avoid exposure to the product beam path by turning the product power off and
disconnecting the product from AC power, or by shuttering the light source to avoid emissions
from the front aperture.
•
ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.
•
FIRE HAZARD! Keep hands, clothes, and all combustible material away from the concentrated
light beam of the projector.
•
Keep fingers and other body parts away from the moving parts in the product. Tie back long
hair, and remove jewelry and loose clothing before manually adjusting the product.
•
FIRE AND SHOCK HAZARD! Use only the attachments, accessories, tools, and replacement parts
specified by Christie.
•
SHOCK HAZARD! Power supply uses double pole/neutral fusing. Disconnect all power sources
before opening the product.
•
FIRE HAZARD! Do not exceed 30 A for the breaker to power Input 1 on the projector.
•
Install the product near an easily accessible AC receptacle.
•
UV EXPOSURE! Protective UV safety glasses with side shields and Christie approved protective
safety clothing must be worn when performing optical adjustments or servicing the product.
•
FIRE AND SHOCK HAZARD! Use only the attachments, accessories, tools, and replacement parts
specified by Christie.
Service guidelines
Boxer 4K Service Guide
13
020-101699-04 Rev. 1 (02-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for Boxer 30
Page 1: ...Service Guide 020 101699 04 Boxer 4K...
Page 113: ......
