1. Remove the card cage (on page 59).
2. On the back of the card cage, remove eight screws securing the cover on the HIP.
3. Take off the back cover of the card cage.
4. Remove the nine screws securing the HIP.
5. To remove, pull out the HIP straight up to clear the inline connector.
6. Replace the HIP.
7. To re-install, follow these steps in reverse order.
When replacing the HIP, make sure you place it appropriately and secure the inline connector.
Replacing the backplane board (C4BP)
The backplane board (C4BP) provides the main interconnection between the input modules and the
signal processing board (the HIP).
Estimated replacement time: 16 minutes
Printed circuit boards and sensors
Boxer 4K Service Guide
100
020-101699-04 Rev. 1 (02-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for Boxer 30
Page 1: ...Service Guide 020 101699 04 Boxer 4K...
Page 113: ......