4
1.1 07/2018
020-001485-01
Please note the following restrictions to ensure correct usage and measurement readout:
•
Due to its IR laser technology, the AirScan device itself should not be exposed to direct sun-
light or direct tungsten lighting as this would distort the correct readout of the sensed data.
•
Physical contact with the front cover of the sensor is to be avoided. Note that even a slight
movement of the sensor affects the measurement values.
•
If the AirScan is (partly) mounted into a wall or exhibition stand, make sure that the sensor (to
be exact, the glass window) is not covered and the entire interactivity area is free.
•
If a protective housing is provided for the sensor, the detection must not occur through addi-
tional window material (plastic, glass, etc.).
•
Vapors, smoke, dust and all particles visible in the air could affect the measurement values.
•
Glass and highly reflective materials such as mirrors could falsify the measurement value.
•
Avoid large temperature fluctuations.
Drivers
It is not necessary to install a driver. The communication between the AirScan and Widget De-
signer works over Ethernet and all necessary components come with the installation of Widget
Designer.