Christie ACT, User Manual

Page: 33 / 74

Section 3: Operation
Christie ACT User Manual 3-7
020-100129-05 Rev. 1 (02-2010)
3.5 User Access and Rights
Accessing different Web UI tabs and functions depends on your login permission level. There are five distinct
password-protected levels of users as identified in
Table 3.1 . Each progressive level of security has increased
rights and the rights of previous levels.
Table 3.1 Permission Levels
User Security Levels Access to Tabs...
Status Main
Status
About Any user can view basic Christie ACT status and diagnostic
information.
Operator Main
Operator
Status
About Operators can view additional operator control buttons.
Advanced Main
Operator
Editor
Status
Relay Test
Config (All except Users)
About
Advanced Operators cannot access the Config: Users tab.
Administrator Main
Operator
Editor
Status
Relay Test
Config (All)
About This can include defining new Ethernet settings (IP network
address).
NOTE
: Administrators can add users and set user
access rights from its level and below only.
Service Main
Operator
Editor
Relay Test
Config (All)
About
Administrator Password
Installers and other service personnel can access additional
tabs. This allows them to define remote access rights and the
ability to add administrators.