Chris-Craft 307-Q, Manual

Page: 38 / 54

PARTS LIST- MODEL 327Q ENGINES
35
Code
No.
29
30
31
32
33
34
35
35
36
37
38
39
40
41
42
46
47
48
49
50
51
Part
No.
16.95-08372
16.95-08373
16.20-083 14
16.97-08377
16.50-083
16
16.30-00 180
16.30-00138
16.30-00144
16.42-00004
16.54-08385
16.54-08384
1 6.58- 10047
16.58- 17288
16.54-084
15
16.55-37304
16.55-37158
16.5
5-3
7
124
16.58-17 120
16.54-10073
16.55-37306
16.51-0001
5
1
1
1
1
1
1
2
1
4
1
1
4
2
2
2
4
1
1
4
2
1
2
1
Name
WATER
SYSTEM
Circulating Water Pump and Pulley Assembly-RH Rot. Consist of
NOTE: When replacing the circulating water pump pulley before engine
serial numbers
307Q
the pin must be
removed.
the following two parts:
Circulating Water Pump and Pulley Assembly-LH Rot.
ONLY.
Consist of
Pulley
Circulating and Sea Water Pump Belt
Gasket-Circulating Pump to Flywheel Cover
Capscrew
x
Capscrew x
Capscrew x (Top outside hole of circulating pump)
kwas h e
the following two parts:
NOTE: The following three parts are used from the circulating pump
Molded Hose-Pump to Left Header
Molded Hose-Pump t o Right Header
Hose Clamp
NOTE: The following four parts are used from the exhaust risers to the
Street Elbow, 45” NPT (One in Each Riser)
Hose Nipple x
Molded Hose
Hose Clamp
NOTE: The following four parts are used between the thermostat housing
Water Hose, Molded-Thermostat Housing to Left Riser
Water Hose, Molded-Thermostat Housing t o Right Riser
Hose Clamp
Elbow, MPT x 1” Hose-One in Each Riser
outlets to the exhaust manifold headers.
cylinder block water inlet fitting cap.
cap and the exhaust risers.
NOTE: The two (2) following parts connect the thermostat housing with
Water Hose ID x 2”
Hose Clamp
Ring-Cover Backing Plate
the flywheel housing:
W O R L D ’ S B U I L D E R