13. FAULT RECTIFICATION
13. FAULT RECTIFICATION
THE SECOND HAND GOES AT 2-SECOND INTERVALS
This action occurs, when the battery rundown warning is activated, which warns the user that the
battery will run down soon. In this case, replace the battery in advance of its lifetime. The watch
keeps rect time during this occurrence. However, when this warning function is on, other functions
are inhibited as follows:
All alarms do not sound.
Changeover to the diving mode (Ready state) is disabled.
When in the diving mode with (Ready state), changeover to
depthmeasurement readings is disabled.
With depth measurement readings displayed on the watch,
the dive alarm not sound. Stop diving immediately.
With temperature measurement active on the watch,
the watch returns to the pre-state.
CHANGEOVER CANNOT BE PERFORMED FROM THE DIVING MODE (READY DISPLAY) OR (0M-REA-
DING AFTER DEPTH MEASUREMENT) TO THE TIME/CALENDAR-MODE.
IN CASE THE DEPTH READING IS ONE METER OR MORE,
THOUGH THE WATCH IS USED ON LAND
In this case, all reset should be performed by referring to following capter („ALL RESET“). If the
watch display is changed to the pre-state of the diving mode (Ready display) or to the time/calendar
mode when the crown is pulled out, there is no problem. If the mode change cannot be made, all
reset should be performed.
AFTER BATTERY REPLACEMENT
After the battery is replaced, be sure to perform all reset by referring
to following capter („ALL RESET“).
74
75
DIGITAL DISPLAY MALFUNCTION
Should strong impact or static electricity be applied to the watch by an accident, the digital display
may malfunction at times. If this occurs, all reset should be performed by referring to following
capter („ALL RESET“).
The alert display for water sensor check is disabled.
