Chr. Ward C60 RIDENT PRO 600, Owner'S Handbook Manual

Page: 15 / 22

14
HOW TO OPERATE YOUR TRIDENT PRO 600
SETTING THE TIME/DATE
• First unscrew the crown anti-clockwise from the
case to position
1
for winding in power. Wind in
a clockwise direction to re-power the watch.
• Pull gently into position 2 . For rapid date
correction, turn in a clockwise direction.
• Pull gently into position
3
. This position is used for
handsetting (anti-clockwise to advance), and
stopping of the second hand. For precise time
setting it is recommended to pass beyond the
desired minute and to set the hand backwards.
PLEASE NOTE: Date correction should not be carried
out between 20.00 hr and 02.00 hr as the watch
gearing will already be aligning itself to change the
date. The crown should always be pushed in after
adjustment, and it is best to do so from position
3
to avoid advancing beyond the desired date.
You must always ensure the crown is fully tightened
before any use in water.
TRIDENT-PRO
600m | 2000ft
AUTOMATIC
1 2 3