Page | 4
Adding the driver to your project
IMPORTANT
– Before undertaking the installation of the driver please follow the licencing steps outlined at the end of
this document.
1.
Launch the Composer Pro application and connect to your project
2.
In the ‘
System Design
’ page select the ‘
Search
’ tab on the right hand side.
3.
Type in ‘
Sainsmart’
in the search window and press the ‘
Enter’
key
4.
Double click on the ‘
SainSmart iMatch V2
’ driver to add it to your project
5.
Highlight the ‘
SainSmart iMatch V2’
driver on the left hand side.
6.
Enter in the
IP Address
of the unit and press set
7.
If you have changed the
Port Number
(you shouldn’t ever need to) then change the port and press set
8.
Click on My Drivers on the right hand side.
