CHOWEL WELCOM-250Y, Maintenance Manual

Page: 4 / 36

WELCOM-250Y, Z MAINTENANCE MANUAL
CHOWEL
- 4 -
READ FIRST
To use this welding controller in safety, the operator should follow industry
standards and safety senses whenever working on, or near the weld machine.
In some case, failure to follow the warning instruction can lead to control or
machine damage. In other cases failure to follow these instructions can lead to
injury, or death of personnel.
Some examples of safe practices are listed below. These examples are not to be
considered a comprehensive listing of safety practices.
Always use safety senses when working with any type of machinery.
DANGER
During electrical power is ON, this welding controller is charged with high
voltage electricity. Turn electrical power OFF before open the door.
In the case the door is opened as it is not turn OFF can lead to injury by an
electric shock, or death of personnel.
WARNING
In some case failure to follow these instructions as follows can lead to control
damage or injury of personnel.
1. Ensure that control / machine is connected to the correct voltage before turning
electrical power ON.
2. Whenever power is ON, stand clear of moving parts.
This practice should be used even if the machine is not actually in use.
3. Before turning electrical power OFF, ensure that personnel are standing clear of
moving parts that are pneumatic or hydraulic powered.
4. Whenever electrical power is turned OFF, install a "lock-out" device at the
main disconnect to prevent power from being accidentally turned ON.