Troubleshooting
37
Problem #
3: Auger comes out of trough.
1. Damaged trough-repair or replace trough.
A. Close trough by installing trough retaining Clip (part no.14431). This item can be installed at any point in the system
to help close up gaps between Troughs.
Problem #
4: One or more loops without feed.
1. Check drop tubes for plugging.
2. Check Intake Boots. Remove any foreign material, if present.
3. Check fill system control.
4. Check hoppers for bridging. If bridging is a problem, lower drop tubes.
Problem #
5: Fill system motor overloads.
1. Check for objects in auger.
2. Remove auger, check for damage.
Problem #
6: Screener
1. The screener bypass bucket should be checked daily.
A. If feed is in bucket, check screens for plugging.
B. If bucket does not contain normal amounts of whole corn or chunks of feed, check screens for holes.
2. Screener will not turn on.
A. Check operation at the switch on the side of screener control.