SPECIFICATIONS
SPM 1050 POWER AMPLIFIER
OUTPUT POWER
200W rms per channel @ 0.05% distortion into 8
,
300W rms per channel into 4
, 360W rms into 2
.
Thermal limitation only, 1 channel driven.
DYNAMIC HEADROOM
280W rms per channel into 8
, 360W rms per channel into 4
. - 1
KHz, 20 cycles on, 480 cycles off. Peak pulses 8 milliseconds burst
75V peak (the equivalent of 800W per channel peak into 4
)
FREQUENCY RESPONSE (8 OHMS)
-1dB, 0.2Hz to 46KHz
-3dB, 0.1Hz to 77KHz
FREQUENCY RESPONSE (4 OHMS)
-1dB, 0.2Hz to 39KHz
-3dB, 0.1Hz to 75KHz
SIGNAL TO NOISE RATIO
Better than -100dB, ‘A’ weighted two thirds power.
CHANNEL SEPARATION
Better than 95dB.
PRE-AMPLIFIER INPUT CONNECTION
2 x gold-plated, fully balanced XLR sockets. 2 x gold-plated custom
phono sockets, unbalanced.
INPUT IMPEDANCE
100k
. Unbalanced/Balanced.
INPUT CAPACITANCE
<30pf.
OUTPUT IMPEDANCE
0.04
OUTPUT INDUCTANCE
2.6
H
OUTPUT CONNECTIONS
8 x 4mm rhodium binding posts (2 pairs Black, 2 pairs Red)
SLEW RATE
60V per
S, 1KHz
20V square wave
GAIN
30dB.
STABILITY
Unconditional
DIMENSIONS
420mm (w) x 355mm (d) x 133mm (h)
WEIGHT
15Kg
Made in England by:
Chord Electronics Limited,
The Pump House, Farleigh Bridge, Farleigh Lane, East Farleigh, Kent
ME16 9NB. United Kingdom.
Tel: 44(0)1622-721444 Fax: 44(0)1622-721555
