NU4 User Manual
Receiver Front Panel
1.
Power on/off button
2.
RF carrier LED indicators
3.
Individual channel volume controls
4.
AF signal LED indicators
Receiver Rear Panel
5.
DC power input jack
6.
BNC antenna connectors
7.
6.3mm jack mix output
8.
XLR individual channel balanced outputs
Transmitters
Note: If replacement transmitters are required, these must be genuine Chord NU4 transmitters,
which transmit the correct pilot tone to sync with the receiver. Transmitters which have the
same carrier frequency but not the correct pilot tone will not work with the NU4 receiver.
Handheld
9.
On LED indicator
10.
On/off switch
11.
Battery compartment
Beltpack
12.
Antenna
13.
On LED indicator
14.
On/off switch
15.
3.5mm threaded jack socket
16.
Gain control
17.
Battery compartment
