Tape recording
You can tape record an input from another audio source or two sources at the same time. If you’ve been using a tape
recorder as an input source, it will already be connected to the T1 or T2 IN sockets. If you haven’t, first connect the tape’s
output to the T1 or T2 IN sockets.
connecting to a Tape recorder to tape an audio source
Use RCA connectors to the left and right pairs marked OUT T1 or T2, or both.
selecting the bus
Your amplifier has two input selection buses. The default bus is bus A and this is the one you would use to choose your inputs
in everyday operation. The advantage of having two buses is that it allows for two tape recorders to tape (different inputs)
simultaneously.
Bus A is permanently connected to the Tape 2 (T2) output and Bus B is permanently connected to Tape 1 (T1) output which
prevents you from accidentally taping to and from the same machine.
You can tape from any source to either of the tape recorder outputs and both outputs can be monitored. For example you can play
a CD on Disc 1 on Bus A and connect your tape recorder to the Tape 2 output while you play a record on Disc 2 on Bus B and
connect another tape recorder to the Tape 1 output. Simply switch between Bus A and Bus B to monitor either of the sources.