171.892UK User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Thank you for choosing this Chord IEM16 UHF in-ear monitoring system. This professional system provides
high quality wireless foldback for accurate audio reference with full freedom of movement. Please read this
manual before using this equipment in order to avoid damage through incorrect operation and to get the best
performance from your purchase.
Contents:
Please take care when unpacking this product. Inspect for any damage and ensure you have the following
components…
UHF wireless transmitter
Detachable BNC antenna
UHF bodypack receiver
Dual driver in-ear monitor headphones
19” rack-mounting kit
Mains power adapter
2 x AA batteries
Warning
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
If liquids are spilled on any component, stop using immediately, allow unit to dry out and have checked by
qualified personnel before further use.
Avoid impact or heavy vibration to any of the components or over-stretching of the cables.
No user serviceable parts inside transmitter or receiver - refer servicing to qualified service personnel.
Safety
Ensure that the correct adapter is used with adequate current rating and that the mains voltage is as
stated on the adapter.
Avoid ingress of water or particles into the transmitter or receiver
Use alkaline or NiMH batteries in the bodypack receiver and remove if unused for long periods.
Observe the correct polarity when replacing batteries
Placement
Ensure good line-of-sight contact between transmitter and receiver for best reception
Keep all components out of direct sunlight and away from heat sources.
Do not place heavy objects on top of the receiver or transmitter
If rack-mounting, ensure adequate support and connection access for the transmitter unit.
Keep the transmitter and receiver away from damp or dusty environments.
Cleaning
Use a soft cloth with a neutral detergent to clean the body of the transmitter and/or receiver.
To avoid damage, do not use solvents to clean the components
Sterile wipes may be used on in-ear headphones – be sure to avoid ingress of fluids into the nozzles
