SU20 User Manual
Receiver Front Panel
Receiver Rear Panel
Transmitters
Note: If replacement transmitters are required, these must be genuine Chord branded transmitters
which transmit the correct pilot tone to match with the receiver. Transmitters which have the
same carrier frequency but not the correct pilot tone will not work with SU-series receivers.
The SU20 system can allow 2 sets to be used together with Red, Green, Blue and Yellow
channels working independently without interference with each other.
1.
Power on/off switch
2.
RF carrier signal indicator - Channel A
3.
AF audio signal indicator - Channel A
4.
VOLUME control
–
Channel A
5.
RF carrier signal indicator - Channel B
6.
AF audio signal indicator - Channel B
7.
VOLUME control
–
Channel B
8.
DC power input jack
9.
BNC antenna connector - Channel B
10. Unbalanced 6.3mm jack output CH. A+B
11. Balanced XLRM output - Channel B
12. Balanced XLRM output - Channel A
13. BNC antenna connector - Channel A
14. Antenna
15. LED indicator
16. On/off switch
17. 3.5mm jack socket (beltpack only)
18. Gain control (beltpack only)
19. Battery compartment
