y approved by the party responsible for compliance could void the users authority to oper
ate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digit
al device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea
sonable protection against harmful interference in a residential installation. This product g
enerates, uses, and can radiate radio frequency energy and, if not installed and used in a
ccordance with the instructions, may cause harmful interference to radio communications
. However, there is no guarantee that interference will not occur in a particular installation.
If this product does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to corre
ct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected. Consult the dealer or an experienced radio/TV technician for help.
Declaration
Guidance and Manufacturer’s declaration – electromagnetic emissions-For all
EQUIPMENT and SYSTEMS
Guidance and Manufacturer’s declaration - electromagnetic emission
The Thermometer is intended for use in the electromagnetic environment specified
below. The customer or the user of Thermometer should assure that it is used in such
an environment.
Emission test
Compliance
Electromagnetic
Environment
–
guidance
RF emissions CISPR
11
Group 1
The Thermometer uses RF energy only for
its internal function. Therefore, its RF
emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
RF emissions CISPR
11
Class B
The thermometer suitable for use in all
establishments,
including
domestic
establishments
and
those
directly
connected to the public low-voltage power
supply network that supplies buildings used
for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Not Applicable
Voltage
fluctuations/
flicker emissions
IEC 61000-3-3
Not Applicable
Guidance and Manufacturer’s declaration – electromagnetic immunity-For all
EQUIPMENT and SYSTEMS
Guidance and Manufacturer’s declaration - electromagnetic immunity
The Thermometer is intended for use in the electromagnetic environment specified
below. The customer or the user of the Thermometer should assure that it is used in
such an environment.