6
Memory Search
1. Short press power scan button, the device will be powered on and default to records.
2. Short press scan button to alternate and check last ten measurements (M1-M10), shown as in Fig.
5.
Fig. 5
Notes:
•
Latest ten measurements of human temperatures can be memorized.
•
Long press the scan button to revert to age range selecting mode.
Power Off
• Long press power button for about 4s to turn the thermometer off.
• The thermometer shall automatically shut off without manipulating in 30 seconds.
• The thermometer will power off if the batteries expire completely. The device will display the low
battery warning symbol “
” and make beep sound.
Troubleshooting
Symbol
Situation
Solution
Hi
When the measured forehead temperature is higher than 43
℃
Re-measure the temperature
Lo
When the measured forehead temperature is lower than 32
℃
Re-measure the temperature
Battery exhausted
Replace batteries
Maintenance and Storage
Please protect the thermometer from mechanical shock or heavy impact. Do not disassemble the unit or
attempt to repair it.
Cleaning:
1. Clean the lens before and after each use.
2. Use an alcohol swab or cotton swab moistened with alcohol (70% medical alcohol) to clean the
thermometer casing and the measuring probe. Wait 10 minutes and allow the thermometer to air-dry
before take a measurement. Ensure that no liquid enters the interior of the thermometer.
3. Never use abrasive cleaning agents, thinners or detergents for cleaning and never immerse the
instrument in water or other cleaning liquids. Take care not to scratch the surface of the probe
membrane or display.
Storage:
