6
1. Assemble/Disassemble the bracket
Assemble:
Mount the wireless charging dock to the bracket, slide the notch connectors
on the mounting plate. Press down to lock and secure in place.
Disassemble:
Pull back the wireless charging dock and pull it from the bracket.
2. Mount/Dismount on the flat surface
Mount:
Remove the plastic cover on suction cup -> Clean the desired mounting
surface -> Press the locker down until the dock is fixed firmly on the surface.
*If
you get the 3M surface adapter on the package, please refer to following steps.
Remove the plastic cover on suction cup -> Clean the desired mounting surface -> Stick
the surface adapter on the mounting surface -> Put the suction cup on the surface
adapter -> Press the locker down until the dock is fixed firmly on the surface adapter.
Dismount:
Pull the locker up and then pull up the release tab to remove the dock.
3. Place your phone on
Press the release button on the back to open arms -> Insert device and squeeze the
arms back together to secure.
4. Head adjustment
Loosen the adjustment knob to freely pivot the head, and then retighten to secure.
Note:
Do not overtighten the adjustment knob.
