561105-10 en ma 2012.10
8/22
• remove the lid and pour the beverage prepared according to the manu-
facturer’s instructions into the bowl;
• never exceed the maximum level, which is marked -MAX- on the tray itself;
• after pouring the product into the bowl, fi t the lid back in place;
• make sure that the plug has been inserted into the mains socket;
• press the main switch to start the machine; the product inside the bowl will
start to be mixed:
Lit LED: -MACHINE ON-
LED off: -MACHINE OFF-
• Set the thermostat to the required temperature to heat the product inside the
bowl.
6. OPERAT
A
A ION
Before the machine may be started up for the fi rst time, specialized tech-
nical personnel must check that it functions properly.
6.1 Starting up
To start up the machine carry out the following steps:
• make sure that the main switch is set to off;
• take off the lid;
• fill the boiler tank with water using the boiler tank level indicator tray, until
it reaches the maximum value indicated on the tray itself, which is marked
-MAX-;
Warning: fill the boiler tank by pouring in water slowly and che-
ck for a few seconds to make sure that the water level has rea-
ched the -MAX- level and that it is stable.
When filling an empty boiler tank for the first time, the amount
of water needed to completely fill the tank is approximately 3.25
litres (0.86 GAL US).
MAX -
Fig. 8
Fig. 10
Fig. 6
MAX -
MIN -
Fig. 7
Fig. 9
