Universal Mount
6
ON Series Replacement Battery Installation
3. Disconnect the battery from the UPS
by grasping and pulling the battery
connectors straight out.
4. Slide battery out (fig. 6).
Fig. 6: Removing the Battery
5. Slide new battery into the UPS and
reconnect the battery connector
(fig.7). The battery connector is
polarized and will only fit one way.
Make sure it is completely installed.
Fig. 7: Replacing the Battery
6. Replace and secure the battery
retention plate with the thumb screws.
7. Replace the front bezel by reversing
all three steps in figure 4.
NOTE:
Do not replace the front bezel
without first securing the battery retention
plate.
Battery
