manualshive.com logo in svg

Chloride Linear Plus LPBP610-2, Operating Manual

Share
Download
Chloride Linear Plus LPBP610-2 Operating Manual Download Page 6

 

Introduction

 

Linear Plus Series User Instruction Manual

1

 

Introduction

 

Thank you for selecting this uninterruptible power supply (UPS).  Chloride’s Linear Plus Series UPS 
offers the most reliable protection from the harmful effects of electrical line disturbances for your 
computing and communications equipment.  Chloride ISO 9001 certification represents our commitment 
to building world-class products. We take pride in every unit that leaves our facility.

 

Registering Your 
UPS

 

To ensure that your Linear Plus Series UPS model and serial number are registered, complete and mail 
the enclosed postage-paid warranty card.

 

Technical Support

 

Chloride offers 24-hour technical support. To contact Chloride Power Protection Technical Services call: 

• North America: (847) 990-3229

Please check with Chloride Technical Services before attempting to repair or return any Chloride product. 
If a Chloride UPS needs repair or replacement, Chloride Technical Services will issue a Return Material 
Authorization (RMA) number along with instructions on how to return the UPS, or arrange for repair in 
the field, at Chloride’s discretion. Contact Chloride Technical Services to order OEM replacement 
batteries.

 

FCC Compliance

 

ATTENTION: 

 

Changes or modifications to this unit not expressly approved by the party responsible or 

in FCC compliance could void the user’s authority to operate the equipment.

 

This equipment was tested and complies with the limits for a Class A digital device, pursuant to Part 15 
of FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
when the UPS is operating in a commercial environment. The UPS generates, uses, and can radiate radio 
frequency energy. If installation and use is not in accordance with the instruction manual, it may cause 
harmful interference to radio communications. 

 

ATTENTION: 

 

Operation of this equipment in a residential area may cause harmful radio 

communications interference. The user is responsible for correcting the interference.

 

Safety Compliance

 

UL listing to UL1778

TUV compliance to EN62040-1

CE

Summary of Contents for Linear Plus LPBP610-2













































Reviews:

No comments

Brands by name

Popular brands

Load more brands