CHIYU CYT-200SC, User Manual

Page: 18 / 29

- 16 -

PORT 2
(1)TCP Server

Function instruction
Function
Description
Local Listen Port Number

If data transmit thru TCP/IP remote command, must select Serial
Server Mode into TCP SERVER and set LISTEN PORT NUMBER
into the same value with monitoring side.

Default setting is
50000
Close Connection When
Remote Idle

The default setting of close connection time is 100 seconds and the
range is from 0 ~ 32768

The value must set to be 0 if you want to keep CYT-200SC connect
with monitoring side or the connection will be off automatically
when remote idle.
Access Password

Make sure the data secure, user must set the code for
management. User must inset the correct password and process
the further procedure after authority.

up to 31 characters
Keep Alive Check

Set Enable or Disable keep alive check function
，
default setting is
Disable

While keep alive check enable, the pin packet will be send to
Gateway every 30 seconds to make cure the connection.
Max TCP Connection
The maximum TCP connection is 4 sets , default setting is 1
Real COM
When using the Virtual COM , if you need CYT-200SC with
VCOM to send each other RTS / CTS, DTR / DSR signal, this
option must be checked