10
Repositioning and Relocating the Refrigerator
•
Unplug the power cord from the wall outlet.
•
Remove all the food and drinks.
•
Securely tape down all loose items inside your refrigerator.
•
Tape the doors to be closed securely.
•
It is recommended that the refrigerator stays in the upright position during
transportation. But if it is laid down for transport purpose, please lift it up
immediately after the job is done. Please wait for at least 24 hours before putting the
power.
TROUBLESHOOTING GUIDE
Problem
Solution
The fridge has no power
Power cord isn’t plugged in properly.
The circuit breaker tripped or a blown fuse.
Try a different power point.
The light is not working.
There is no light in freezer compartment, only fridge
compartment has light.
Make sure the power is connected to the unit.
Compressor runs all the
time
The room temperature is hotter than normal.
A large amount of food has been added to the
refrigerator.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The refrigerator does not have the correct clearances.
The refrigerator has recently been disconnected for a
period of time. 6+ hours are required for the refrigerator
to cool down completely pending on operating
conditions.
Temperature inside the
refrigerator is too warm.
Temperature control is set incorrectly. Turn the control
to a cooler setting and allow several hours for the
temperature to stabilize.
Door is kept open too long or is opened too frequently.
Warm air enters the refrigerator every time the door is
opened). Open the door less often.
The door is not closed completely.
The door gasket does not seal properly.
