for 2s, and the fridge temperature will be controlled at 38
℉
and the freezer temperature at -08
℉
.
When all the doors are close, the display gets extinguished automatically if no key operation within 3 minutes. When the
display is off, it will light up if any door is opened or any key is pressed.
The following key operations are valid only when the keys are unlocked and gets illuminated on the display. (refer to 1.6
for unlocking the keys)
1.Functions
1.1Temp. setting
1
)
Temperature display
Every time when the refrigerator system is powered up, the set temperature of the refrigerator will be displayed in
Fahrenheit by default. And you can switch between the Fahrenheit display and the Celsius display by holding down the
Temp. Zone key for 3s.
Correspondence between the temperatures goes as follows
Fridge temp. display
Freezer temp. display
Fahrenheit
(
℉
)
Celsius
(
℃
)
Fahrenheit
(
℉
)
Celsius
(
℃
)
34
1
3
-16
35
2
2
-17
36
2
1
-17
37
3
0
-18
38
3
-1
-18
39
4
-2
-19
40
4
-3
-19
41
5
-4
-20
42
5
-5
-20
43
6
-6
-21
-7
-22
-8
-22
2
)
Fridge temperature setting
Press the Temp. Zone key to select the fridge zone until the corresponding icon gets flickering, and then press the Temp.
key to set the temperature as desired, finally, press the OK key or wait for 5s to validate the setting.
The fridge temperature setting cycles as following:
3
℃
→4
℃
→5
℃
→6
℃
→OF→1
℃
→2
℃
→3
℃
;
38
℉
→39
℉
→40
℉
→41
℉
→42
℉
→43
℉
→OF→34
℉
→35
℉
→36
℉
→37
℉
→38
℉
OF indicates the fridge is switched off, and when the OF function takes effect, the fridge will stop cooling.
Be sure to take all foods out of the fridge compartment before setting this function.
3
)
Freezer temperature setting
Press the Temp. Zone key to select the freezer zone until the corresponding icon gets flickering, and then press the Temp.
key to set the temperature as desire, finally press the OK key or wait for 5s to validate the setting.
The freezer temperature setting cycles as following:
-22
℃
→
-21
℃
→
-20
℃
→
-19
℃
→
-18
℃
→
-17
℃
→
-16
℃
→
-22
℃
;
-8
℉
→
-7
℉
→
-6
℉
→
-5
℉
→
-4
℉
→
-3
℉
→
-2
℉
→
-1
℉
→ 0
℉
→ 1
℉
→ 2
℉
→ 3
℉
→
-8
℉
1.2 LECO
1
)
When the refrigerator is powered on, the LECO net flavor function will run automatically on a regular basis, lasting for
20 minutes each time; the LECO system decomposes odors and microorganisms into CO2 and H2O. At the same time,
the LECO system releases free radicals to actively eliminate bacteria, creating a cleaner cooling space.
2
)
Exiting the LECO function
The LECO function gets exited automatically 20 minutes after it is enabled.