II. Product Features
This is an inverter fridge-freezer adopting the multiple-door design. Its upper part is the fridge compartment for fresh food
storage, such as fruits, vegetables, eggs, milk, cooked foods, etc.; and its lower part is the freezer compartment where
fish, meat, etc. can be frozen for the long-term storage.
★
Computer control
Adopting the electronic temperature control mode, the fridge-freezer is designed with a LED display screen, by which the
temperature of each compartment and the working parameters can be managed and set.
★
Inverter technology
Integrated with precise frequency conversion, noise reduction, energy saving, precise temperature control and other
technologies, the fridge-freezer boasts of superior performances. Furthermore, working efficiency of the inverter
compressor can be automatically adjusted according to the ambient temperature and the set temperature, so as to keep
the fridge-freezer operating in its optimal state.
★
LECO
The fridge-freezer is internally configured with the LECO device for the net flavor and fresh-keeping purpose, with the
preservation time of fruits and vegetables effectively extended.
★
Green technology
The freon-free refrigerant and foaming insulation material are used for the fridge-freezer, causing no damage to the ozone
layer and having a very small impact on the global warming, so it is the environmentally friendly product.
★
Stylish appearance
Adopting the optimized man-machine engineering design, the side-by-side four-door refrigerator has an elegant and novel
appearance, and is easy to be opened.
★
More user-friendly designs
Such functions as wide working voltage range, automatic temperature control, power-off memory, power-on delay,
automatic alarm, fast freezing, and fridge power-off, etc. are available.
Due to technological innovation, the descriptions of the product in this manual may not be completely consistent with your
refrigerator. Details are in accordance with the material item.
III. Preparations for use
Installation location
1.
Ventilation condition
The position you select for the refrigerator installation should be well-ventilated and has less hot air. Do not locate the
refrigerator near a heat source such as cooker, boiler, and avoid it from direct sunlight, thus guaranteeing the refrigeration
effect while saving energy consumption. Do not locate the refrigerator in the damp place, so as to prevent the refrigerator
from rusting and leaking electricity. The result of the total space of the room in which the refrigerator is installed being
divided by the refrigerant charge amount of the refrigerator shall not be less than 8 g/ M
3
.
Note: The amount of refrigerant charged for the refrigerator can be found on the nameplate.
2. Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore, at least 300mm
(11.8")
of free space should be
spared at the top side, more than 100mm
(3.9")
on both sides, and above 50mm
(2")
at the back side of the refrigerator.
Dimensions in mm:
W
D
H
A
B
C(
°
)
E
F
785(31")
717(28.2")
1815(71.5")
1274(50.2") 1063(41.9")
125
±
5
50(2")
100(3.9")
No
Description
1
LED Light
2
Egg Tray
3
Bottle Rack
4
Gallon Bottle Bins
5
Refrigerator Glass Shelf
6
Salad Crisper
7
Upper Freezer Drawer
8
Freezer Room Glass Shelf
9
Bottom Freezer Drawer
10
Adjustable Foot
