ChipSiP
CWFC10x Serial
Enable Port Forwarding: Default is Unchecked,
Disable. If enable,
IP Address: Enter the IP address of the PC where
the applications are being set.
Protocol: Select the protocol (TCP/UDP/Both) for
the application
Port Range: Enter the start and end port number
which ranges of the external port used to set the
server or internet application.
Apply Changes
: Click the
Apply Changes
button
to register the client to new configuration setting.
Reset
: Click the
Reset
button to abort change and
recover the previous configuration setting.
Delete Selected
: Click to delete the selected clients
that will be access right removed from CWFC103.
Delete All
: Click to delete all the registered clients
from the access allowed list.
