CS-8 Series Omega-Phi Rev1.04, Oct. 2015
-10-
1.
Depth
control – attenuates the modulation signal at jack "2" between 0
and 1
2.
Modulation input
(envelope symbol) jack – channels the applied signal
via
Depth
control "1" to the control input of the FM-Index-VCA
3.
Coupling
2-pos. toggle switch – selects for the FM-modulation signal at
jack "4" the coupling AC (alternating voltage) or DC (direct current)
4.
FM
jack (input) – channels the applied signal to the signal input of the
FM-Index-VCA
5.
FM pol
2-colour-LED – displays the current working range of the core
VCO; "green" -> positive frequency range, "red" -> negative frequency
range
6.
Index
control – adjusts the modulation depth
FM
(at jack "4") at the
control input of the FM-Index-VCA
7.
Scale
3-pos. toggle switch – determines the base frequency (without
applied external control voltages) of the VCO
8.
Scale
4-pole rotary switch – determines the base frequency (without
applied external control voltages) of the VCO
9.
Depth
control – attenuates the modulation signal at jack "10"
between
0
and 1
10.
Modulation input
(envelope symbol) jack – channels the applied signal
via
Depth
control via
Depth
control "9" to the control input of the PM-
Index-VCA
11.
Polarity
2-pos. toggle switch – selects the polarity of the PM-modulation
input signal at jack "12" (non-inverted or inverted)
12.
PM
jack (input) – channels the applied signal to the signal input of the
PM-Index-VCA
13.
Phi limit
2-colour-LED – displays the maximum/minimum border of the
possible phase-shift; "green" -> positive phase border, "red" -> negative
phase border
14.
Index
control – adjusts the modulation depth
PM
(at jack "12") at the
control input of the PM-Index-VCA
15.
Tune
control – detunes the frequency, set by scale, by another ± 1 octave
16.
PW
control – adjusts the duty-cycle of the variable rectangle signal at
jack "35"
17.
Shape
control – displaces the progress of the saw-tooth curve at jack
"28" related to the triangle signal (jack "30") at its corner-(reverting)points
18.
Saw
2-pos. toggle switch – selects rising or falling saw-tooth output and
activates jack "31" (position "dwn/act") at the same time
Summary of Contents for Omega-PhiCS-8 Series
Page 1: ...CS 8 Series Owners Manual Omega Phi...
Page 2: ......
