Chipolino Terra, Instruction Manual

Page: 6 / 12

6
5 – INSTALLATION AND REMOVAL OF BUMPER
Note:
To remove the front bumper press the buttons on both sides and remove
the bumper.
6 – INSTALLATION AND REMOVAL OF CANOPY
CAUTION! Always attach the canopy at the back of the seat in order to prevent the
child from sliding off and injury .
FUNCTIONS
7 – SWIVEL AND STRAIGHT MOTION OF FRONT WHEELS
IMPORTANT! When using the stroller on uneven surfaces, fix the wheels for
straight movement only.
8 – PARKING DEVICE
9 – HANDLE HEIGHT ADJUSTMENT
9-1 – Press
9-2 – Move in the desired position .
Note : The fixing of each position is accompanied with the sound “click” .
10 - CANOPY ADJUSTMENT
11 – SEAT POSITION ADJUSTMENT
12 - REASTRAINT SYSTEM (5-POINT SAFETY HARNESS)
CAUTION! Belts must be snug to child’s body and must not be twisted.
IMPORTANT!
Periodically check to ensure that the seat belt is securely attached
to the stroller frame as well as securely fastened. The seat belt straps must not be
damaged, worn out or twisted
.
13 – STROLLER FOLDING
IMPORTANT!
Before folding the stroller, activate the parking device,
the seat must
be forward facing and front wheels must be in swivel function, the canopy must be
closed and storage basket should be empty.
After folding, attach the transport hook .
14 – TRANSFORMING THE COT INTO SEAT
15 - TRANSFORMING THE SEAT INTO COT
Unfasten the belts on bottom side of the seat .
CAUTION! When the seat is in carry cot mode, it must be in rearward position –
child facing the mother.
IMPORTANT! When the seat is transformed in carry cot, always remove the
harness or tuck them the sides of the seat and cover them with a pad/mattress/
with thickness up to 20 mm.
16 –
INSTALLATION AND REMOVAL OF CAR SEAT “TERRA” ON
FRAME OF STROLLER TERRA.
You can install Milo car seat on the frame of this stroller using adaptors.