3
ASSEMBLY INSTRUCTION AND FUNCTIONS
FUNCTIONS
1 – ASSEMBLY OF WOODEN LEGS
Assemble wooden leg A with upper wooden leg A, B-B, C-C, D-D.
2 – INSTALLATION OF ASSEMBLED WOODEN LEGS
Note:
• Fixing of crossed wooden legs with screw must be done later (see fig. 5).
• On the assembled legs A and B there are openings for installation of footrests. Make sure these
openings are located at front (2-3), otherwise figure 2 cannot be made.
3 – ASSEMBLY OF FOOTRESTS
4 – ASSEMBLY OF SEAT TO THE ROTATABLE BASE
IMPORTANT!
After tightening the screws, the rotation button should be easy to press without any
pressure.
5 – ASSEMBLY OF ROTATABLE BASE TO WOODEN LEGS
IMPORTANT!
During tightening the screw in center (M6x45), chair must be turned with bottom showing
upwards. Screw must be tightened well to secure the stability of high chair.
6 – ASSEMBLY OF PROTECTIVE T-BAR T THE TRAY
7 – ASSEMBLY OF FOOD TRAY (2 positions)
Pull both levers under the tray (7-1) and insert it (7-2) until you reach the required position. Release the
levers to fix the tray.
Upper tray is removable for easy cleaning.
8 – PLACING THE ANTI-SLIP MATS
9 – RESTRAINT SYSTEM
Press the button in center of buckle and split the belts (9-1).
Move the buckles upwards or downwards to adjust the length of belts (9-2).
ATTENTION!
Safety harnesses must not be worn out or torn and buckles must be strong, without any
damages and provide secure connection.
ATTENTION!
The harness must fit well the baby and must not be twisted. They must not change their
length after they are locked!
10 – ADJUSTMENT FROM HIGH CHAIR TO SMALL CHAIR
Note:
Store and keep in a safe place the screws and wooden legs for future usage.
To prevent sliding of chair and damages of floor surface, install the round head screws, as figure shows.
11 – ADJUSTMENT FROM HIGH CHAIR TO BOOSTER SEAT
Note:
Store and keep in a safe place the wooden legs and accessories for them for future usage.
IMPORTANT!
Install the booster seat on adult chair with appropriate sizes (see figure)!
12 – SEAT ROTATION AT 360 DEGREES (8 positions)
IMPORTANT!
Before usage make sure seat is fixed in required position and it is non-moving.
