Chipolino PIRUET, Instruction Manual

Page: 5 / 12

4
16 – FOLDING THE STROLLER
16-1 – Seat must be facing forward. If it is in rearward facing position, rotate the seat;
16-2 – Press the two button for folding on the handle. Frame will fold, but not fully;
16-3 – Position the backrest in lying position and the leg rest in the position shown in the
16-4 – Press simultaneously buttons А and В on the handle of the stroller;
16-5 – Fold the stroller until it is
16-6 – Folded stroller.
17 – CARRY COT
IMPORTANT! Baby’s head should be above the level of his body!
17-1 – To unfold the carry cot, pull the two U-shaped rods to both ends of the carry cot until they go
inside the grooves.
17-2 – Place the mattress in the cot.
17-3 – Press the buttons on both sides of the canopy to open or fold it.
18 – INSTALLING THE CARRY COT ON THE FRAME
CAUTION! THE CARRY COT MUST BE INSTALLED ONLY IN REARWARD FACING POSITION!
Note: For your convenience, engage the parking device before installing the carry cot on the frame.
Installation:
18-1 – Insert the adaptors on the carry cot;
18-2 – Press buttons А and at the same time open the bracket В;
18-3 – Place the adaptors on the stroller tubes. Close brackets B in order to the cot;
18-4 – Fix the carry cot to the frame using the belts.
Removal:
18-5 – Press buttons А and at the same time open brackets В. Remove the cot from the frame.
18-6 – Removal of the adaptors – Slide up the adapters buttons (A) and pull out the adapters out.
19 – INSTALLING THE CAR SEAT ON THE FRAME
CAUTION! THE CAR SEAT MUST BE INSTALLED ONLY IN REARWARD FACING POSITION!
Note: For your convenience, engage the parking device before installing the car seat on the frame.
Installation:
19-1 – Insert the adaptors on the car seat;
19-2 – Press buttons А and at the same time open the bracket В
19-3 – Place the adaptors on the stroller tubes.
19-4 - Close brackets B in order to the car seat.
19-5 – Car seat is installed.
Removal:
19-6 – Press buttons А and at the same time open brackets В. Remove the car seat from the frame.
19-7 – Removal of the adaptors – Press the buttons under the car seat upholstery and pull out the
adapters.