5
ATTACHING THE REAR WHEELS
Insert the rear wheel into the axle until you hear a click. Repeat
for other rear wheel.
Pull to confirm it is assembled securely. See
fig.6
.
REMOVING THE REAR WHEELS
Release the rear wheels by pushing the release lever downwards.
Pull wheels off of stroller.
ATTACHING THE CHILD TRAY
Insert the ends of the child tray into receiving points of
the stroller
(
See
fig.7)
.
Place the unfolded stroller so that its three
wheels rest on the floor. Note: the seat may
be installed in forward or rear facing position.
Lower the seat into the receiver points on
stroller frame. See
fig.8 and fig.8-1
. Once the
seat is installed properly, you will hear a
distinct click and the Safety Indicator Button
will then turn green. To reverse the seat, press
the release button, lift the seat and rotate.
Locate the seat release lever below the round joints on the side of
the seat. Lift lever upwards and remove the seat from stroller base.
See
fig.9
.
ATTACHING SEAT
REMOVING THE SEAT
ATTACHING THE CUP HOLDER
Attach the cup holder upward and with a slight pressure at the end of the handle.
WARNING!
Do not place hot liquids in the cup holder for parents, because in given circum-
stances the liquid may be splashed over your child!