background image

11

1. 

ATTENTION!

 Make sure that your vehicle is equipped with ISOFIX attachment points!

 

Install the ISOFIX guide to the ISOFIX attachmnet point of vehicle. 

2.  Release the ISOFIX anchors by pressing the ISOFIX buttons . Set them maximum out. 

3.  Insert ISOFIX anchors of car seat to ISOFIX attachment point of vehicle.

4.  You must hear click sound by fixing. 

5. 

CAUTION!

 ISOFIX anchors are fixed when both of them are fully green. 

 

Note:

 If indicators are red, do the installation again following the above described sequence of  

 actions.

 

Adjust the recline in position 1, 2, 3 or 4. 

6.  Press the car seat until it reaches the backrest of vehicle’s seat. 

7.  and 8 Try to pull the car seat to assure that ISOFIX anchors are fixed to ISOFIX attchment point of 

 

 vehicle. 

9.  Press the button of buckle for adjustment of top tether’s length and pull it at maximum. 

10. Attach the hook of top tether to the attachmnet point of your vehicle. Note: Belt must not be twisted.  

11.  Tighten the top tether.

12. After tightning indicator of top tether belt must be fully green. 

 

Note:

 If indicator is red, do the installation again following the above described sequence of actions.

13. Make sure that car seat is stable fixed. 

14, 15. Press the button for belts adjustment and at the same time pull the shoulder belts towards you.

16, 17 Press the button at central buckle to release the belts and place the child in car seat.

18, 19, 20 Pull the handle for head rest adjustment and set the head support in suitable position  

 

(see the figure   - correct height).

21, 22 Join the shoulder belts into the central buckle. Pull the strap that adjusts the length of belts so that  

  the belts hold will the body of child without bringing pressure and discomfort to the child.  

 

Recommened space between child’s body and belts is 1-2 cm.

ATTENTION!

!

For child’s height:

• 

76  up to 80 cm

  use only soft pad of the seat 

Soft pad

Soft pad

Summary of Contents for MY SIZE





















Reviews: