Chipolino MOMMY 'N ME, Instructions For Use Manual

Page: 4 / 11

3
INTSTRUCTIONS FOR ASSEMBLY AND FUNCTIONS
ASSEMBLY
FUNCTIONS
CAUTION!
Follow exactly the instructions given and check the pictures.
CAUTION!
AFTER EACH OPERATION, MAKE SURE THAT EACH FIXING IS SECURE!
CAUTION!
In most cases after the completion of an operation you will hear a clicking sound.
CAUTION!
Keep away your fingers from pinching during assembly!
No tools are needed to complete the assembly of this product.
The assembly and functions are numbered from 1 to 9. Use the operations descriptions given in this
manual and their matching picture
1 – INSTALLING OF THE CROSS BAR, SIDE SUPPORTS AND THE LEGS.
2 – INSTALLING THE COT
2-1 – Fix the cot to the side supports and fasten the Velcro strap;
2-2 – Fasten all zippers; 2-3 – Place the mattress on the bottom of the cot;
2-4 – Installed cot.
3 – HEIGHT ADJUSTMENT
3-1 – Adjusting the cot in higher position – pull the two height adjusting buttons simultaneously and
move the cot in higher position.
3-2 – Adjusting the cot in lower position – pull the two height adjusting buttons simultaneously and move
the cot in lower position.
4 – DROP SIDE
4-1 – Open the zippers on both sides;
4-2 –
Note:
Press in the direction of marked arrow;
4-4 – Roll the fabric around the drop side top rail and fix it.
5 - „FIXING TO ADULT’S BED”
Thread the belts under and over bed’s mattress, buckle them and tighten.
ATTENTION! MAKE SURE THAT THE TELESCOPIC LEGS ARE TIGHTLY PRESSED AGAINST THE
ADULT’S BED SIDE!
6 – STORAGE SPACE/LOWER LEVEL
Storage space: 6-1 – Open the base zipper; 6-2 – pull down the mesh.
Lower level: 6-3 – Open the zipper and remove the support board and cross bar; 6-4 – Fix the plastic
bracket down on the base; 6-5 – Place the mattress.
7 – PARKING DEVICE
CAUTION! ALWAYS APPLY THE PARKING DEVICE WHEN THERE IS A CHILD IN THE CRIB!
8 – ADJUSTING LEGS LENGTH
9 – MOSQUITO NET (sold separately)
Note: The mosquito net is sold separately and can be purchased.