3
1 – UNFOLDING THE STROLLER
2 – FRONT WHEELS
2–1 Installation of front wheels
2-2 Straight and swivel motion of front wheels
Note:
When you move the stroller on uneven surfaces, it is recommended to fix the wheeels in
straight motion.
3 – ASSEMBLY OF REAR WHEELS
3-1 Installation of rear axis
3-2 Assembly of wheels to the rear axis – press the button and insert the wheel into the axis.
Release to fix.
3-3 Parking device
IMPORTANT!
Always apply the parking devices while stroller is not in motion to avoid sudden sliding
and injuries!
4 – ASSEMBLY OF FOOT RESTS
Place the footrests to the frame and push to fix them at place.
5 – SAFETY BUMPERS
6 – CANOPIES
CAUTION!
Always attach the canopies at the back of the seats in order to prevent the children from
sliding off and injury.
7 – HEIGHT ADJUSTMENT OF HANDLE
Press the buttons at both sides of handle and set the handle bar upwards or downwards up to the re-
quired position.
8 – ADJUSTING THE BACKRESTS RECLINE POSITIONS
Press mechanisms (1) and set them upwards and downwards (2) until you reach the required position.
9 – RESTRAINT SYSTEM (SAFETY BELT)
9-1 Unlock: Press the button at central button and split the belts;
9-2 Locking the belts
Adjust the belts length by the sliders/adjusters.
CAUTION!
Belts must be snug to children’s bodies and must not be twisted.
IMPORTANT!
Periodically check to ensure that the seat belt is securely attached to the stroller frame
as well as securely fastened. The seat belt straps must not be damaged, worn out or twisted and they
must provide stable connection!
CAUTION!
Babies aged under 6 months must be put in the stroller only when seats’ backrests are in
most lying position! Before you place the babies in the seats, remove the shoulder safety belts or toss
them to the seats’ sides and cover the seats with soft pad that is no thicker than 15 mm!
10 – LEG REST ADJUSTMENT
Press the buttons on both sides of leg rest and move it down;
Push each leg rest up with your hand to reach higher position;
By each fixing you must hear click sound.
11 – FOLDING THE STROLLER
IMPORTANT!
Before folding the stroller the parking device must be engaged, unfasten the fabric from
front bumper and the storage basket should be empty.
11-1 – Pull the fabric cover of canopy from the side tubes of handle;
11-2 – Pull upwards the side folding mechanisms at both sides;
11-3 – Fold the stroller and fix it with the hook.