background image

5

6 –

 Pull the recline lever (I) and set the car seat in 

position 4.

 

Note:

 The seat must be as reclined as possible when car seat is in position „REARWARD” FACING.

7 –

 Place the car seat in position „REARWARD” FACING.

8 –

 Thread the lap belt under the soft liner in car seat (D).

9 –

 At the same time thread the diagonal belt through the guide (L) and back part of the seat.

10 –

 Fasten the vehicle belt in the vehicle belt buckle.

Note:

 Make sure the belts are not twisted.

11 –

 Tighten the belt.

12 –

 Place the clip (Q) on the diagonal belt.

Note:

 Make sure that the clip (Q) is as close as possible to the buckle and is not in touch with it.

13 –

 Loosening the belts:  Press the button I and at the same time pull the shoulder straps E.

14 –

 Press the central buckle button and split the belts.

15 –

 Place the child in the car seat and the shoulder belts on his shoulders.

16 –

 Join the metal ends of the shoulder belts and insert them in the central buckle.

ATTENTION!

 Make sure that the metal ends are joined correctly and the belts are not twisted!

17 –

 Tighten the shoulder belts by pulling the adjustment strap (J).

18 –

 Place the seat in 

positions 1, 2 and 3.

19 –

 Place the car seat in position „FORWARD” FACING.

20 –

 Thread the vehicle belt through the opening and back part of the seat. Fasten the vehicle belt in 

the vehicle belt buckle (see fig.10).

Note:

 Make sure the belts are not twisted.

21 –

 Tighten the belt.

Place the clip (Q) on the diagonal belt.

Note:

 Make sure that the clip (Q) is as close as possible to the buckle and is not in touch with it.

22 –

 By using the lever I set the car seat in one of the recline 

positions (1,2 or 3)

 and make sure it is 

securely fixed.

23 –

 Loosening the belts:  Press button H and at the same time pull the shoulder belts E.

Press the central buckle button and split the belts (see fig.14).

24 –

 Place the child in the car seat and the shoulder belts on his shoulders.

Join the metal ends of the shoulder belts and insert them in the central buckle (see fig.16).

ATTENTION!

 Make sure that the metal ends are joined correctly and the belts are not twisted!

25 –

 Tighten the shoulder belts by pulling the adjustment strap (J).

GROUP 0+ (0-13 kg)

INSTALLATION OF CAR SEAT AND SECURING THE CHILD 

Car seat position „REARWARD” FACING

GROUP I (9-18 kg)

INSTALLATION OF CAR SEAT AND SECURING THE CHILD 

Car seat position „FORWARD” FACING

Summary of Contents for CORSO












Reviews: