4
1. INSTALLATION OF FRONT AND REAR LEGS
2. ASSEMBLY OF PLAY TABLE BODY
Align both parts of play table body and fix them with the screws (8).
Note:
At the play table body’ slots there are assembles nuts.
3. ASSEMBLY OF PLAY TABLE LEGS
3-1 – Tighten the play table legs to the slots at the bottom of plat table base.
Note:
At the play table body’ slots there are assembles nuts.
3-2 – CAUTION! If needed to assure safety and balance the play table, rotate the down part of the legs
as figure shows.
4. PLACING THE FABRIC COVER
Place the fabric cover over the seat. Fix the safety harness to the seat as threading the buckles through
the slots and set them as figure shows.
5. ASSEMBLY OF DOUBLE FOOD TRAY
5-1 – Align the food tray to the armrests, hold the levers at both sides of tray to unlock the fixing mecha
-
nism and slide until you reach the required position. Release the levers and move the tray forth or back
until you hear a click sound and it is stable fixed.
5-2 and 5-3 – Food tray can be adjusted in 4 positions forth/back.
6. REMOVING OF UPPER TRAY
Release the tray at both sides and remove it from main food tray.
7. ASEEMBLE OF CHAIR TO THE TABLE
Place the chair legs to the table slots and press until pins lock and you hear a click sound.
8. TRANSFORMATION FROM HIGH CHAIR TO SMALL CHAIR AND PLAY TABLE
Press the buttons under the table to release the legs of the chair and remove the chair.
9. SAFETY HARNESS SYSTEM
Press the button in middle of central buckle and split the belts.
Join the belts into the central buckle.
Move the length adjusters up/down to change the length of the belts.
ATTENTION!
Safety harnesses must not be worn out or torn and buckles must be strong, without any damages
and provide secure connection!
The harness must fit well the baby and must not be twisted and must not change their length when
fastened!
ATTENTION!
Follow exactly the instructions given and the order assembly and usage, described in
texts and pictures. In order to complete the assembly, you do not need any tools.
ATTENTION
! CHECK THE STABILITY OF FIXING AFTER EACH OPERATION!
ASSEMBLY INSTRUCTIONS. FUNCTIONS
