5
13.
Fig. 5 – Step 1:
Remove the screw, nut and plastic ends of the
lower foot rest (L)
. Put the lower foot rest on to the
respective place in the tube of the frame so that the openings in the foot rest and the frame will
match. Fix with the plastic ends, screw and nut.
14.
Fig. 5 – Step 2:
Put the
upper foot rest (R)
on to the respective place in the tube of the frame so that the openings
in the foot rest and the frame will match. Fix with a
screw (F-4)
.
15.
Fig. 5 – Step 3:
Remove the
bracket (F-6
) from the harness of the
seat pad (I-2)
. Insert the harness through the
upper parts of the
seat (О)
, after that put back the
bracket of the (F-6)
.
16.
Fig. 5 – Step 4:
Attach the seat to the respective spot on the frame and fix with a М6х45 screw.
17. Insert the tube of the
left bottom push bar (Е)
in the opening in the frame tube under the
seat (fig.6).
18. Insert the tube of the
backrest (H)
in the opening in the bottom part of the push bar (fig.6).
19. Insert the tube of the
right bottom push bar (Е)
in the opening in the frame tube under the
seat (fig.6).
20. Insert the tube of the
backrest (H)
in the opening in the bottom part of the push bar (fig.6).
21. Fix with a
screw (N-2)
, as shown in fig.6.
22. Remove the
brackets (F-6)
from both ends of the harnesses (at the back side of the backrest) Slide
the harnesses through the respective openings in the tubes of the bottom pushbar, after that put
them back the brackets on the harnesses as shown in fig.6.
fig. 6
necessary
tools
E
E
H
N-2
F-6