Chipolino Baby Boss, Instructions For Use Manual, Page: 5 / 12

4
6 – „FIXING TO THE ADULT’S BED”
6-1 – Clip strap buckle to both side and bottom of the crib as shown in the picture.
6-2 – Pull the free end of the strap around the parent’s bed frame (not mattress), then close second
buckle on the strap, and tighten the loop of the strap.
ATTENTION!
The straps must pass around parent’s bed,
NOT
around the MATTRESS!
6-3 –
ATTENTION!
Tighten the straps tightly against the adult’s bed side!
7 – ROCKING FUNCTION
Press the button and twist the lower tube until you hear a „click“ sound and the tube is fixed. Now you
can use the rocking function.
ATTENTION!
DO NOT USE THE ROCKING FUNCTION WHЕН THE CRIB IS ATTACHED TO THE
PARENT’S BED.
8 – HEIGHT ADJUSTMENT
The cot may be adjusted in 7 height positions.
Press the buttons on two sides of the crib and move it to the desired position.
IMPORTANT!
THE COT MATTRESS LEVEL MAY BE ADJUSTED IN MAXIMUM TWO DIFFERENT
HEIGHT LEVELS BETWEEN THE TWO SIDES.
IMPORTANT!
THE BABY’S HEAD MUST ALWAYS BE IN THE HIGHER POSITION.
9 – FOLDING THE CRIB
9-1 – Press button 1 and lift the cot. Then press button 2 and again lift the cot.
Repeat the same actions on other side of the cot and remove it from the frame.
9-2 – Turn the cot upside down and release the screws, as shown in the picture.
9-3 – Press the tube button (1), lift the tube up (2), then release it (3).
9-4 – Press he buttons on both sides of the side supports and fold it.
10 – MOSQUITO NET
10-1 – Place the mosquito net over the cot
10-2 and 10-3 Fix the mosquito net with snap buttons to the upholstery of the cot.
FUNCTIONS
1-1 1-2
1
2
“click”