background image

6

1.1 Prepare the ISOFIX connectors.

1.2 Make sure the 5-point harness is correctly installed. 

1.3 Make sure the 5-point harness is correctly adjusted. 

1.4 Adjust the seat in most recline position.

1.5 Make sure the car seat in “REARWARD FACING” POSITION and the mechanism for rotating the  

 

seat is fixed.

1.6 Make sure the car seat is in most lying position and place the car seat on the vehicle seat, so it is in  

 

position “REARWARD FACING” POSITION (in the direction opposite to the traffic) - fig.11.  

1.7 Insert the ISOFIX connectors of the car seat (15) in ISOFIX attachments of the vehicle, until you  

 

heat “click” sound and the indicators (16) show “green” color. (fig. 11 and 12).

 

CAUTION!

 The ISOFIX connectors (15) are fixed, when both indicators (16) are completely green.

1.8  Push the car seat ,until it is leaning against the backrest of passenger seat (fig. 12 and 13)

1.9   Installation of Top tether:

 

• Take out the top tether from the bag. Press the button for adjusting the Top Tether, to release the  

 

belt (fig.14).

 

• Insert the top tether strap into the belt guide slot (17) and tighten the strap (fig.15). 

 

• Hook the snap hook (18) onto the top tether anchorage point, recommended in the vehicle manual.

 

Note:

 Look for sign 

   (fig.16).

 

• Tighten the free end of the top tether, until the indicator shows green. (fig.17)

1.10 Securing the child in the car seat with 5-point harness:

 

• Press the red button (19), to release the buckle, press the button for adjusting the shoulder belts 

 

  (04) and pull out the shoulder belts (05). Note: Pull the shoulder belts (05), not the pads (06).  

 

(fig.18).

 

• Place your child in the seat. 

 

• Get together the both metal latches of the shoulder belts and insert them in the buckle. When it is  

 

fixed, you will hear a “click” sound. (fig.19, 20, 21).

CAUTION!

ALWAYS BEFORE TRAVELLING:

  Make sure ISOFIX connectors are securely fixed to the ISOFIX attachments of the vehicle 

 

 

and both indicators are completely “green”.

  Make sure the car seat is placed close to the backrest of the passenger seat.

  Make sure the top tether is tightened and the indicator is completely “green“.

  Make sure the 5-point harness of the car seat is fitted snugly to the child without pressing 

 

 

and the belts are not twisted.

  Make sure the shoulder belts are in correct position on the child’s shoulders and they are 

 

 

not twisted.

2  INSTALLATION OF THE CAR SEAT IN “FORWARD FACING” POSITION

2.1 HEIGHT OF THE CHILD: 76-105 cm

THE CAR SEAT IS FITTED WITH 5-POINT HARNESS OF THE CAR SEAT + TOP TETHER

click

Summary of Contents for 4KID

















Reviews: