Rear Panel CH-HDVR4-4
(8 Channel)
①
:
Power (including Power, Ground, Ignition)
.
②
:
Camera 5 and 6(including power for camera)
③
:
Camera 7 and 8(including power for camera)
④
:
CVBS Video and Audio Out (including power for monitor)
⑤
:
HDMI Out
⑥
:
Camera 3(including power for camera)
⑦
:
Camera 4(including power for camera)
⑧
:
Camera 2(including power for camera)
⑨
:
Camera 1(including power for camera)
⑩
:
3 sensors, 1 RS232 (For GPS), 5V DC output, 1 LANC input
⑾
:
4G/3G antenna
1. Power (including Power, Ground, Ignition).
2.
Camera 1 and 2 (including power for camera) AHD or CVBS cameras only
3. Camera 3 and 4 (including power for camera) AHD or CVBS cameras only
4. CVBS Video Out to Monitor (including power for monitor)
5. HDMI Out to HDMI Monitor
6. Sensor Connector: 3 Alarm/Sensor wires (Grey), GPS (3 pin plug), Speed sensor (Purple)
7. 4G/3G antenna (only on 3G / 4G models)
The CH-AHDVR8 model has 4 camera input sockets (2, 3) with 2 camera connection on each for total of 8
analogue cameras. There is 1 HD Digital camera input which can be used but this must be configured in the
SETTINGS and will not normally be active unless specified at the time of order.
Rear Panel CH-AHDVR4
(4 Channel)
