06
4
Maintenance
Tighten the terminals of the button on a regular basis to make sure the
wires are connected securely.
Tighten the fixing screws of the button on a regular basis.
Disconnect the power before regular maintenance to ensure personal
safety.
It is recommended to conduct maintenance once a month.
See Table 7 for Analysis and Troubleshooting of Faults.
Figure 4 Assembly diagram of
metal head type base
Figure 5 Disassembly diagram of
plastic head type base
Table 7 Analysis and Troubleshooting of Faults
Symptons
Cause analysis
Troubleshooting method and precautions
The button
cannot be
operated
smoothly
There are foreign objects
like dust or greasy dirt
on the button operation
head or pushing rod of
contact assembly.
Remove the foreign objects like dust or greasy
dirt on the button operation head or pushing
rod of contact assembly, make sure the
environment is dry and clean after installing
the panel. Use proper lubricant at the moving
surface of the parts if necessary.
Check if the input voltage complies with the
rated operating voltage; check if there is any
short circuit or disconnection in the circuit.
The input voltage does
not comply with the rated
operating voltage, or
there is short circuit or
disconnection in the circuit.
The light
bead is not
bright
enough or is
not on at all
