Indicator
Status
Flashing red
light
PAIRING button has been pressed, and the airborne unit is
in the PAIRING state.
Flashing green
light
The signal was detected but not connected. Need to do the
pairing operation.
Green light ON
The successful pairing.
Red light ON
No signal was detected. Pls turn on the power switch at
the GCS or check whether the airborne unit is connected
correctly.
5. VIEDO indicator
Video link indicator, used for indicating the video source input status
Indicator
Status
Green light ON
HDMI signal is detected and work normally.
Flashing green
light
HDMI signal has been detected, but unable to transmit.It is
necessary to re-power-on the airborne unit or check the
connection of the airborne unit.
Red light ON
No video source has been detected or video source does
not supported. Pls confirm that the camera is connected
correctly or that the output format of the camera is correct.
6. PAIRING button
Frequency pairing button, through which the airborne unit can be pairing with
the GCS.
7. HDMI input
Use the HDMI cable to connect this port to the camera's HDMI output port. It
supports up to 1080P60 video input.
8. CAN bus
